Netgear WNR1000v3h2 사용자 설명서

Click the 

 button in the Add WPS Client screen. The Connecting to New Wireless Client 

screen displays.

The green 

 light on the WNR1000v3h2 router begins to blink in a regular pattern. 

While the button light is blinking, you have 2 minutes to enable WPS on the device you 
are trying to connect to the router.

In the wireless client, follow its specific networking instructions to enable WPS, to allow it to 

connect to the router.

The WNR1000v3h2 router’s green 

 light ceases blinking and remains on when one of 

these conditions occurs:

The router and the client establish a wireless connection.

The 2-minute window period expires for establishing a WPS connection. If the 

connection is not established, the SSID and security settings will not be changed.

Security PIN Entry

There are two ways to enable a wireless client to join a network using a PIN: using the 
router’s security PIN or using the wireless client’s security PIN.

Obtain your router’s security PIN from the rear panel of the router or from the Advanced 

Wireless Settings screen.