Netgear WNR3500L 사용자 설명서

Safeguarding Your Network

2-9

4. The settings displayed on the screen depend on which security option you select.

5. For WPA-PSK or WPA2-PSK, enter the passphrase. 

6. To save your settings, click Apply.

If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure 
the wireless router’s SSID and security settings and, at the same time, connect the wireless client 
securely and easily to the wireless router. Look for the 

 symbol on your client device 

(computers that will connect wirelessly to the wireless router are clients). WPS automatically 
configures the network name (SSID) and wireless security settings for the wireless router (if the 
wireless router is in its default state) and transmits these settings to the wireless client.

Some considerations regarding WPS are:

•

WPS supports non-security, WPA-PSK, WPA2-PSK, and WEP with auto or open 
authentication. WEP with Shared Key authentication is not supported.

•

If your wireless network will include a combination of WPS capable devices and non-WPS 
capable devices, NETGEAR suggests that you set up your wireless network and security 
settings manually first, and use WPS only for adding additional WPS capable devices. See 

A WPS client can be added using the Push Button method or the PIN method.

•

Using the Push Button. This is the preferred method. See the following section, 

•

Entering a PIN. For information about using the PIN method, see 

Note: NETGEAR’s Push 'N' Connect feature is based on the Wi-Fi Protected Setup 

(WPS) standard (for more information, see 

). All other Wi-Fi-

certified and WPS-capable products should be compatible with NETGEAR 
products that implement Push 'N' Connect.