Netgear WNDR3400v3 사용자 설명서
Getting Started with NETGEAR genie
19
N600 Wireless Dual Band Router WNDR3400v3
1.
Launch your browser from a computer or wireless device that is connected to the router.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
The login window displays:
admin
********
3.
Enter admin for the router user name and password for the router password, both in
lowercase letters.
Note:
The router user name and password are different from the user name
and password for logging in to your Internet connection. See
and password for logging in to your Internet connection. See
17 for more information.
Upgrade Router Firmware
When you set up your router and are connected to the Internet, the router automatically
checks for you to see if newer firmware is available. If it is, a message is displayed on the top
of the screen. See
checks for you to see if newer firmware is available. If it is, a message is displayed on the top
of the screen. See
66 for more information about
upgrading firmware.
Click the message when it shows up, and click Yes to upgrade the router with the latest
firmware. After the upgrade, the router restarts.
firmware. After the upgrade, the router restarts.
CAUTION:
Do not try to go online, turn off the router, shut down the computer, or do
anything else to the router until the router finishes restarting and the
Power LED has stopped blinking for several seconds.
anything else to the router until the router finishes restarting and the
Power LED has stopped blinking for several seconds.
Router Dashboard (Basic Home Screen)
The router Basic Home screen has a dashboard that lets you see the status of your Internet
connection and network at a glance. You can click any of the six sections of the dashboard to
connection and network at a glance. You can click any of the six sections of the dashboard to