Netgear WNDR3400v3 사용자 설명서
Getting Started with NETGEAR genie
21
N600 Wireless Dual Band Router WNDR3400v3
Manual Method
To connect manually:
1.
Open the software that manages your wireless connections on the wireless device
(laptop computer, gaming device, iPhone) that you want to connect to your router. The
software scans for all wireless networks in your area.
2.
Look for your network and select it. If you did not change the name of your network during
the setup process, look for the default WiFi network name (SSID) and select it. The default
SSID is on the product label on the bottom of the router.
3.
Enter the router password and click Connect. The default router password is on the product
label on the bottom of the router.
4.
Repeat steps 1–3 to add other wireless devices.
Wi-Fi Protected Setup (WPS) Method
Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to
a home network while maintaining security. To use WPS, make sure that all wireless devices
to be connected to the network are Wi-Fi certified and support WPS. During the connection
process, the client gets the security settings from the router so that every device in the
network has the same security settings.
a home network while maintaining security. To use WPS, make sure that all wireless devices
to be connected to the network are Wi-Fi certified and support WPS. During the connection
process, the client gets the security settings from the router so that every device in the
network has the same security settings.
To use WPS to join the wireless network:
If your wireless device supports WPS (Push 'N' Connect), follow these steps:
1.
Press the WPS button on the router
until the LED status changes.
2.
Within 2 minutes, press the WPS button on your wireless device, or follow the WPS
instructions that came with the device. The device is now connected to your router.
3.
Repeat steps 1–2 to add other WPS wireless devices.