Netgear WNDR3700v2 사용자 설명서
Troubleshooting
26
Troubleshooting
This chapter gives information about troubleshooting your N600 wireless gigabit router. You can
find help with the following problems:
find help with the following problems:
•
•
•
•
•
•
Basic Setup Checklist
The following items are the most common errors made when initially setting up a router. Carefully
review the checklist to make sure that you have followed the recommended procedures.
review the checklist to make sure that you have followed the recommended procedures.
Be sure to always start your network in this sequence:
1.
Turn off and unplug the modem from its power outlet, and turn off the N600 wireless gigabit
router and computer.
router and computer.
2.
Turn on the modem, and wait 2 minutes.
3.
Turn on the N600 wireless gigabit router, and wait 1 minute.
4.
Turn on the computer.
Make sure that the Ethernet cables are securely plugged in:
1.
Verify that the Internet status light on the N600 wireless gigabit router is lit if the Ethernet
cable to the N600 wireless gigabit router from the modem is plugged in securely and the
modem and N600 wireless gigabit router are both turned on (see
cable to the N600 wireless gigabit router from the modem is plugged in securely and the
modem and N600 wireless gigabit router are both turned on (see
2.
Verify that for each powered-on computer connected to the N600 wireless gigabit router with
a securely plugged in Ethernet cable, the corresponding N600 wireless gigabit router LAN
port status light is lit (see
a securely plugged in Ethernet cable, the corresponding N600 wireless gigabit router LAN
port status light is lit (see
wireless gigabit router identifies the number of each LAN port (see
).