Netgear RT314 사용자 설명서
Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
Advanced Configuration of the Router
5-7
Use the PORTS menu to configure the router to forward incoming protocols to IP addresses on
your local network based on the port number. In addition to servers for specific protocols, you can
also specify a Default (also called DMZ) Server to which all other incoming protocols are
forwarded. To configure port forwarding to a local server:
your local network based on the port number. In addition to servers for specific protocols, you can
also specify a Default (also called DMZ) Server to which all other incoming protocols are
forwarded. To configure port forwarding to a local server:
1.
Enter the Port Number in an unused Port # box.
2.
Enter the IP address of the local server in the corresponding Server IP Address box.
3.
Click Apply at the bottom of the menu.
Local Web and FTP Server Example
If a local PC, with a private address of 192.168.0.33, acts as a Web and FTP server, configure the
PORTS menu to forward ports 80 (HTTP) and 21 (FTP) to local address 192.168.0.33 as shown in
PORTS menu to forward ports 80 (HTTP) and 21 (FTP) to local address 192.168.0.33 as shown in
In order for a remote user to access this server from the Internet, the remote user must know the IP
address that has been assigned by your ISP. If this address is 172.16.1.23, for example, an Internet
user can access your Web server by directing the browser to http://172.16.1.23. The assigned IP
address can be found in the Maintenance Status Menu, where it is shown as the WAN IP Address.
address that has been assigned by your ISP. If this address is 172.16.1.23, for example, an Internet
user can access your Web server by directing the browser to http://172.16.1.23. The assigned IP
address can be found in the Maintenance Status Menu, where it is shown as the WAN IP Address.
Some considerations for this application are:
•
If your account’s IP address is assigned dynamically by your ISP, the IP address may change
periodically as the DHCP lease expires.
periodically as the DHCP lease expires.
•
If the IP address of the local PC is assigned by DHCP, it may change when the PC is rebooted.
To avoid this, change the configuration of your PCs to use fixed private addresses rather than
DHCP-assigned addresses.
To avoid this, change the configuration of your PCs to use fixed private addresses rather than
DHCP-assigned addresses.
•
Local PCs must access the local server using the PCs’ local LAN address (192.168.0.33 in this
example). Attempts by local PCs to access the server using the external IP address
(172.16.1.23 in this example) will fail.
example). Attempts by local PCs to access the server using the external IP address
(172.16.1.23 in this example) will fail.
Table 5-4.
Port Table Entries (Example)
Port #
Server IP Address
Default
0.0.0.0
80 (HTTP)
192.168.0.33
21 (FTP)
192.168.0.33