Netgear GS728TPP 사용자 설명서
68
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2.
Next to DHCP Snooping Mode, select Enable or Disable to turn the DHCP snooping feature
on or off. The factory default is disabled.
3.
Next to MAC Address Validation, select Enable or Disable to turn on or off the MAC
address validation feature. MAC address validation is enabled by default.
4.
Enter the VLAN in the VLAN ID field to enable the DHCP snooping mode.
5.
Select Enable or Disable from the DHCP snooping mode list to enable or disable the DHCP
snooping feature for entered VLAN. The factory default is disabled.
6.
Click APPLY to apply the change to the system.
Configuration changes take effect immediately.
DHCP Snooping Interface Configuration
Use the DHCP Snooping Interface Configuration screen to view and configure each port as a
trusted or untrusted port. Any DHCP responses received on a trusted port are forwarded. If a
port is configured as untrusted, any DHCP (or BootP) responses received on that port are
discarded.
trusted or untrusted port. Any DHCP responses received on a trusted port are forwarded. If a
port is configured as untrusted, any DHCP (or BootP) responses received on that port are
discarded.
To configure DHCP snooping interface settings:
1.
Select System
Services
DHCP Snooping
Interface Configuration.