Netgear GS728TPP 사용자 설명서
70
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
DHCP Snooping Binding Configuration
To configure DHCP binding settings:
1.
Select System
Services
DHCP Snooping
Binding Configuration.
The following screen displays:
2.
In the Static Binding Configuration section, in the Interface list, select the interface for which
to add a binding to the DHCP snooping database.
3.
In the MAC Address field, specify the MAC address for the binding to be added.
This MAC address is the key to the binding database.
4.
In the VLAN ID list, select the VLAN from the list for the binding rule.
The valid range of the VLAN ID is 1–4093.
5.
In the IP Address field, specify a valid IP address for the binding rule.
6.
Click ADD to add the DHCP snooping binding entry to the database.
7.
Click APPLY to apply the change to the system.
Configuration changes take effect immediately.
Click DELETE to delete selected DHCP snooping binding static entries from the database, or
CLEAR to delete all DHCP snooping binding entries from the database.
CLEAR to delete all DHCP snooping binding entries from the database.
The following table describes the information that displays for DHCP Snooping Dynamic
Binding Configuration:
Binding Configuration: