Netgear WNR834Bv2 사용자 설명서

10

Installing Your Router Using the Smart Wizard

you can always access the router’s user interface later to select a security option (see 

You are now connected to the Internet!

To set up additional wireless computers in your network to access the router and connect to the 
Internet, see 

.

The Smart Wizard only appears when you first install the router or when the router is in its factory 
default state (for example, if you have reset the router to its factory default settings). If you want to 
change the settings after installing and configuring your router using the Smart Wizard, you must 
open a browser window and log in to the router. You will also be prompted to check for new router 
firmware.

Open a browser window and type http://www.routerlogin.net in the address field of your 
browser. Press Enter.

A login window similar to the one shown below will display.

To ensure optimum performance of your high-speed wireless router, the 
wireless adapter card for each computer in your network should support the 
same technology as your router (see the online User Manual for more 
information).

You can enter either of these addresses to connect to your wireless router: 

http://www.routerlogin.net or http://www.routerlogin.com.