Netgear MBRN3000-100NAS 사용자 설명서

6.  

Troubleshooting

This chapter gives information about troubleshooting your Mobile Broadband Wireless-N Router. 
After each problem description, instructions are provided to help you diagnose and solve the 
problem. For the common problems listed, go to the section indicated.

Is the router on?

Have I connected the router correctly?

Go to 

on page 57.

I can’t access the router’s configuration with my browser.

Go to 

on page 58.

I’ve configured the router but I can’t access the Internet.

Go to 

on page 59.

I want to clear the configuration and start over again.

Go to 

Basic Functioning

After you turn on power to the router, the following sequence of events should occur:

When power is first applied, verify that the Power 

 LED is on.

After approximately 10 seconds, verify that:

The Power LED is still solid green. A red light indicates the unit has failed its power-on 

self-test (POST).

The Ethernet LAN port LEDs are lit for any local ports that are connected.

If a LAN port’s LED is lit, a link has been established to the connected device. If a 
LAN port is connected to a 100 Mbps device, verify that the port’s LED is green. If the 
port is 10 Mbps, the LED is amber.

The USB and Internet LEDs are lit.