Netgear FVS124G 사용자 설명서

다운로드
페이지 238
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports 
3-14
Network Planning
202-10085-01, March 2005
The purpose of the fully-qualified domain name is this case is to toggle the domain name of the 
gateway router between the IP addresses of the active WAN port (i.e., WAN1 and WAN2) so that 
the remote PC client can determine the gateway IP address to establish or re-establish a VPN 
tunnel.
VPN Telecommuter: Dual Gateway WAN Ports for Load Balancing
In the case of the dual WAN ports on the gateway VPN firewall (
), the remote PC 
client initiates the VPN tunnel with the appropriate gateway WAN port (i.e., port WAN1 or WAN2 
as necessary to balance the loads of the two gateway WAN ports) because the IP address of the 
remote NAT router is not known in advance. The chosen gateway WAN port must act as the 
responder.
Figure 3-19:  Dual gateway WAN ports (load balancing case) for VPN telecommuter
The IP addresses of the gateway WAN ports can be either fixed or dynamic. If an IP address is 
dynamic, a fully-qualified domain name must be used. If an IP address is fixed, a fully-qualified 
domain name is optional.
Gateway A
bzrouter2.dyndns.org
10.5.6.0/24
10.5.6.1
WAN1 IP
WAN IP
LAN IP
Client B
0.0.0.0
VPN Router
(at employer's
main office)
Telecommuter Example
(Dual WAN Ports, Load Balancing)
NAT Router B
NAT Router
(at telecommuter's
home office)
Remote PC
(running NETGEAR
ProSafe VPN Client)
Fully-Qualified Domain Names (FQDN)
- optional for Fixed IP addresses
- required for Dynamic IP addresses
WAN2 IP
bzrouter1.dyndns.org