Netgear FVS124G 사용자 설명서

Connecting the FVS124G to the Internet

4-3

You make these selections during 

.

•

There are a variety of WAN options you can choose when the factory default settings are 
not applicable to your installation. These include enabling a WAN port to respond to a 
ping and setting MTU size, port speed, and upload bandwidth. You will make these 
choices in 

4.

Prepare to physically connect the firewall to cable or DSL modems and a computer. You will 
do this in 

.

To use the FVS124G VPN Firewall on your network, each computer must have an installed 
Ethernet Network Interface Card (NIC) and an Ethernet cable. If the computer will connect to your 
network at 100 Mbps, you must use a Category 5 (CAT5) cable such as the one provided with your 
firewall.

The FVS124G includes a built-in Web Configuration Manager. To access the configuration menus 
on the FVS124G, your must use a Java-enabled web browser program that supports HTTP uploads 
such as Microsoft Internet Explorer or Netscape Navigator. NETGEAR recommends using 
Internet Explorer or Netscape Navigator 4.0 or above. Free browser programs are readily available 
for Windows, Macintosh, or UNIX/Linux.

For the initial connection to the Internet and configuration of your firewall, you will need to 
connect a computer to the firewall that is set to automatically get its TCP/IP configuration from the 
firewall via DHCP.

For help with DHCP configuration, please refer to 

.

The cable or DSL modem broadband access device must provide a standard 10 Mbps (10BASE-T) 
or 100 Mbps (100BASE-Tx) Ethernet interface.