Netgear fvs114 사용자 설명서
Reference Manual for the ProSafe VPN Firewall FVS114
Basic Virtual Private Networking
5-29
202-10098-01, April 2005
Figure 5-36: Pinging test results
Note: The pings may fail the first time. If so, then try the pings a second time.
Verifying the Status of a VPN Tunnel
To use the VPN Status page to determine the status of a VPN tunnel, perform the following steps:
1.
Log in to the VPN Firewall.
2.
Open the FVS114 management interface and click VPN Status under VPN to get the VPN
Status/Log screen (
Status/Log screen (
).
Figure 5-37: VPN Status/Log screen
Log—this log shows the details of recent VPN activity, including the building of the VPN
tunnel. If there is a problem with the VPN tunnel, refer to the log for information about what
might be the cause of the problem.
tunnel. If there is a problem with the VPN tunnel, refer to the log for information about what
might be the cause of the problem.
•
Click Refresh to see the most recent entries.