Netgear D7000 사용자 설명서

다운로드
페이지 313
Position Your Modem Router
The modem router lets you access your network anywhere within the operating range of your WiFi network.
However, the operating distance or range of your WiFi connection can vary significantly depending on
the physical placement of your modem router. For example, the thickness and number of walls the WiFi
signal passes through can limit the range.
Additionally, other WiFi access points in and around your home might affect your modem router’s signal.
WiFi access points are routers, repeaters, WiFi range extenders, and any other device that emits a WiFi
signal for network access.
Position your modem router according to the following guidelines:
Place your modem router near the center of the area where your computers and other devices operate
and within line of sight to your WiFi devices.
Make sure that the modem router is within reach of an AC power outlet and near Ethernet cables for
wired computers.
Place the modem router in an elevated location, minimizing the number walls and ceilings between
the modem router and your other devices.
Place the modem router away from electrical devices such as these:
Ceiling fans
Home security systems
Microwaves
Computers
Base of a cordless phone
2.4 GHz cordless phone
Place the modem router away from large metal surfaces, large glass surfaces, insulated walls, and
items such as these:
Solid metal door
Aluminum studs
Fish tanks
Mirrors
Brick
Concrete
If you are using adjacent access points, use different radio frequency channels to reduce interference.
Connect to the Modem Router
During and after installation, you can connect to the modem router’s network through a wired or WiFi
connection. If you set up your computer to use a static IP address, change the settings of your computer
so that it uses Dynamic Host Configuration Protocol (DHCP).
Install and Access the Modem Router and Its Network
20
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000