Netgear D7000 사용자 설명서

The default WiFi password (also referred to as the network key or passphrase) is also on the product
label.

Click the Connect button.

The device connects to the WiFi network of the modem router.

Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to a home
network while maintaining security. To use WPS (Push 'N' Connect), make sure that all WiFi devices to
be connected to the network are Wi-Fi certified and support WPS. During the connection process, the
client gets the security settings from the modem router so that every device in the network supports the
same security settings.

To use WPS to connect a device to the WiFi network of the modem router:

Make sure that the modem router is receiving power (its Power LED is lit).

Check the WPS instructions for your computer or WiFi device.

Press the WPS button on the top panel of the modem router for three seconds.

Within two minutes, press the WPS button on your WiFi device, or follow the WPS instructions that
came with the device.

The WPS process automatically sets up the device with the network password and connects the
device to the WiFi network of the modem router.

For more information, see 

Separate types of logins serve different purposes. This section describes the differences so that you know
which login to use when.

Types of logins: