Netgear D7000 사용자 설명서

You might find the MAC address on the product label of your device. Enter the MAC address
in the AABBCCDDEEFF format, not in the AA:BB:CC:DD:EE:FF format.

d. Click the Next button.

If the Congratulations! window still does not display and the modem router still does not connect to
the Internet, do the following:
a. Review all your settings and make sure that you selected the correct options and entered everything

correctly.

b. Run the Setup Wizard one more time.
c. Contact your ISP to verify that you are using the correct configuration information.
d. Read 

 on page 299.

e. If problems persist, register your NETGEAR product and contact NETGEAR technical support.

You can view or change the modem router’s ADSL Internet connection settings manually. The following
sections describe the options that are available to you to manually set up the ADSL Internet connection:

Some ISPs require that you register on their website before you can obtain Internet
service. Follow the directions that your ISP gave you.

If you want to manually configure the ADSL connection settings, use the information that your ISP gave
you to connect to your Internet service. If you cannot find this information, contact your ISP. Entering
incorrect information might prevent the modem router from connecting to the Internet.

The modem router provides a virtual Internet interface and a virtual IPTV interface. In most situations,
you only need to configure the Internet interface. If you use one or more IPTV devices, you might also
need to configure the IPTV interface. Follow the directions that your ISP gave you.

If you must configure the IPTV interface, first use the following procedure to configure
the Internet interface. Then, repeat the procedure to configure the IPTV interface.

Launch an Internet browser from a computer or WiFi device that is connected to the network.

Type http://www.routerlogin.net.