Netgear D7000 사용자 설명서

Enter the MAC address that you want to use. By default, the field
displays the MAC address of the Internet port.

Use This MAC Address

Click the Apply button.

Your settings are saved.

Click the Test button to test your Internet connection.

If the NETGEAR website does not display within one minute, see 

on page 299.

You can view or change the modem router’s VDSL Internet connection settings manually. The following
sections describe the options that are available to you to manually set up the VDSL Internet connection:

 on page 68

Some ISPs require that you register on their website before you can obtain Internet
service. Follow the directions that your ISP gave you.

If you want to manually configure the VDSL connection settings, use the information that your ISP gave
you to connect to your Internet service. If you cannot find this information, contact your ISP. Entering
incorrect information might prevent the modem router from connecting to the Internet.

The modem router provides a virtual Internet interface and a virtual IPTV interface. In most situations,
you only need to configure the Internet interface. If you use one or more IPTV devices, you might also
need to configure the IPTV interface. Follow the directions that your ISP gave you.

If you must configure the IPTV interface, first use the following procedure to configure
the Internet interface. Then, repeat the procedure to configure the IPTV interface.

Launch an Internet browser from a computer or WiFi device that is connected to the network.

Type http://www.routerlogin.net.