Netgear CG814M 사용자 설명서
Reference Manual for the Model CG814M Wireless Cable Modem Gateway
1-6
Introduction
You can use some of the LEDs to verify connections.
lists and describes each LED on
the front panel of the CG814M Gateway. These LEDs are green when lit.
Table 1-1.
LED Descriptions
Label
Activity
Description
Power
On
Off
Off
Power is supplied to the gateway.
Power is not supplied to the gateway.
Power is not supplied to the gateway.
Test
On
Off
Off
A system failure has occurred. Reboot the gateway.
Normal operation.
Cable Link
On (Green)
Off
Configuration of the cable interface by your cable service provider
is complete.
is complete.
Configuration of the cable interface is still in progress.
Cable
Traffic
Traffic
On
Off
Off
Data is being transmitted or received on the cable interface.
The cable interface is idle.
Wireless
On
Blink
Blink
Indicates that the wireless Access Point is operating normally.
Data is being transmitted or received on the wireless interface.
Local
(Local Area
Network)
(Local Area
Network)
On (Green)
Blink (Green)
On (Yellow)
Blink (Yellow)
Off
Blink (Green)
On (Yellow)
Blink (Yellow)
Off
The Local port has detected link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
USB
On (Green)
Blink (Green)
Off
Blink (Green)
Off
The Local port has detected link with a USB device.
Data is being tranmitted or received through USB.
No link is detected on the USB port.
Data is being tranmitted or received through USB.
No link is detected on the USB port.