Netgear FVS338 사용자 설명서

1-6

Introduction

The ProSafe VPN Firewall 50 front panel shown below contains the port connections, status 
LEDs, and the factory defaults reset button. 

The table below describes each item on the front panel and its operation. 

Power LED

On (Green)
Off

Power is supplied to the router.
Power is not supplied to the router.

Test LED

On (Amber)
Blinking (Amber)
Off

Test mode: The system is initializing or the initialization has failed.
Writing to Flash memory (during upgrading or resetting to defaults).
The system has booted successfully.

MDM LED

On (Green)

Blinking (Green)
Off

The serial port has successfully connected to an ISP and received an 
IP Address.
Server data is being transmitted or received by the serial port.
The serial port has no link.

Internet 
LEDs

Link/Act LED

On (Green)
Blinking (Green)
Off

The WAN port has detected a link with a connected Ethernet device.
Data is being transmitted or received by the WAN port.
The WAN port has no link.

100 LED

On (Green)
Off

The WAN port is operating at 100 Mbps.
The WAN port is operating at 10 Mbps.