Netgear FVS338 사용자 설명서

2-2

Connecting the FVS338 to the Internet

To log in to the VPN firewall:

1. Open a Internet Explorer, Netscape® Navigator, or Firefox browser. In the browser window, 

enter http://192.168.1.1 in the address field. The FVS338 login screen will display.

2. Enter admin

 for the User Name and password for the Password, both in lower case 

letters.The firewall user name and password are not the same as any user name or password 
you may use to log in to your Internet connection.

3. Click Login. The Broadband ISP Settings screen will display.

You can configure both Broadband ISP Settings and Dialup ISP Settings.from the WAN Settings 
menu. 

To configure your Broadband ISP Settings:

1. Select Network Configuration from the main menu and WAN Settings from the submenu. 

The Broadband ISP Settings screen will display. 

Note: You might want to enable remote management at this time so that you can log 

in remotely in the future to manage the firewall. See 

 for more information. Remote management 

enable is cleared with a factory default reset. If you enable remote 
management, you are strongly advised to change your password (see