Netgear FVS338 사용자 설명서

2-12

Connecting the FVS338 to the Internet

4. If your ISP has not assigned any Domain Name Servers (DNS) addresses, select the Get 

dynamically from ISP radio box. If your ISP has assigned DNS addresses, select the Use 
these DNS Servers radio box. Ensure that you fill in valid DNS server IP addresses in the 
fields. Incorrect DNS entries may cause connectivity issues. 

5. Click Apply to save the settings or click Cancel to revert to the previous settings. 

6. Click Test to try and connect to the NETGEAR Web site. If you connect successfully and your 

settings work, then you may click Logout or go on and configure additional settings. 

You can also click on the Broadband Status link or the Current IP Address link to check on 
connection status and current IP address.

The traffic meter is useful when an ISP charges by traffic volume over a given period of time or if 
you want to look at traffic types over a period of time.

To enable the traffic meter:

1. From the primary menu, select Monitoring, and then select Traffic Meter from the secondary 

menu. The Broadband Traffic Meter screen will display. Fill out the information described 
in 

Table 2-2

.

2. Click Apply to apply the settings or click Cancel to return to the previous settings.

3. Select the Dialup Traffic Meter tab and repeat steps 1 through 3 to set the Traffic Meter the 

the Dialup port (if required). 

Note: Domain name servers (DNS) convert Internet names such as www.google.com, 

www.netgear.com, etc. to Internet addresses called IP addresses. Incorrect 
settings here will result in connectivity problems.