Netgear FVS338 사용자 설명서

LAN Configuration

3-1

This chapter describes how to configure LAN Setup, LAN Groups and Routing (Static IP) features 
of your ProSafe VPN Firewall 50. These features can be found under the Network Configuration 
menu of the router interface.

By default, the firewall will function as a DHCP (Dynamic Host Configuration Protocol) server, 
allowing it to assign IP, DNS server, WINS Server, and default gateway addresses to all computers 
connected to the firewall LAN. The assigned default gateway address is the LAN address of the 
firewall. IP addresses will be assigned to the attached PCs from a pool of addresses specified in 
this menu. Each pool address is tested before it is assigned to avoid duplicate addresses on the 
LAN.

For most applications, the default DHCP and TCP/IP settings of the firewall are satisfactory. See 
the link to 

 for an explanation of 

DHCP and information about how to assign IP addresses for your network. 

The firewall will deliver the following parameters to any LAN device that requests DHCP:

•

An IP Address from the range you have defined

•

Subnet Mask

•

Gateway IP Address (the firewall’s LAN IP address)

•

Primary DNS Server (the firewall’s LAN IP address)

•

WINS Server (if you entered a WINS server address in the DHCP Setup menu)

•

Lease Time (date obtained and duration of lease).

The LAN Setup screen allows you to configure the LAN on your router. The default values are 
suitable for most users and situations.