Netgear FVS318v3 사용자 설명서
Reference Manual for the ProSafe VPN Firewall FVS318v3
E-28
VPN Configuration of NETGEAR FVS318v3
January 2005
Configuring the VPN Tunnel
Note: This scenario assumes all ports are open on the FVS318v3.
Figure E-19: LAN to PC VPN access from an
FVS318v3
to a VPN Client
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FVS318v3 labeled Gateway A as in the illustration (
Log in at the default address of
http://192.168.0.1
with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
chosen).
2. Use the VPN Wizard to configure the FVS318v3 at Gateway A.
Follow the steps illustrated in
(the resulting parameter screens are shown in
•
Connection Name: Scenario_1 (in this example)
•
Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel
endpoints
endpoints
•
Connection Type: A Remote VPN Client
Note:
Based on the network addresses used in this example, you would log in to the
LAN IP address of
http://10.5.6.1
at Gateway A.
Gateway A
14.15.16.17
10.5.6.0/24
10.5.6.1
WAN IP
WAN IP
LAN IP
Client B
0.0.0.0
Router
Scenario 1
PC
(running NETGEAR
ProSafe VPN Client)
(running NETGEAR
ProSafe VPN Client)