Netgear FVS318v3 사용자 설명서

3-4

Connecting the Firewall to the Internet

d.

Check the VPN firewall router status lights to verify the following:

•

PWR: The power light should turn solid green. If it does not, see 

.

TEST: The test light blinks when the firewall is first turned on then goes off. If after 
two minutes it is still on, see 

.

•

INTERNET: The Internet LINK light should be lit. If not, make sure the Ethernet cable 
is securely attached to the VPN firewall router Internet port and the modem, and the 
modem is powered on.

•

LOCAL: A LOCAL light should be lit. Green on the 100 line indicates your computer 
is communicating at 100 Mbps; off on the 100 line indicates 10 Mbps. If a LOCAL 
light is not lit, check that the Ethernet cable from the computer to the firewall is 
securely attached at both ends, and that the computer is turned on.

1.

From the Ethernet connected PC you just set up, open a browser such as Internet Explorer or 
Netscape® Navigator.