Netgear FVS318v3 사용자 설명서

Connecting the Firewall to the Internet

3-11

If you do not click Logout, the VPN firewall router waits five minutes after there is no activity 
before it automatically logs you out.

You can use the Smart Setup Wizard to assist with manual configuration or to verify the Internet 
connection. The Smart Setup Wizard is not the same as the Smart Wizard Configuration Assistant 
(as illustrated in 

) that only appears when the firewall is in its factory default state. After 

you configure the VPN firewall router, the Smart Wizard Configuration Assistant will not appear 
again. 

To use the Smart Setup Wizard to assist with manual configuration or to verify the Internet 
connection settings, follow this procedure.

1.

Connect to the VPN firewall router by typing http://www.routerlogin.net in the address field 
of your browser, then press Enter. 

2.

For security reasons, the firewall has its own user name and password. When prompted, enter 
admin

 for the firewall user name and password for the firewall password, both in lower case 

letters. To change the password, see 

Note: The firewall user name and password are not the same as any user name or password 
you may use to log in to your Internet connection.

Once you have entered your user name and password, your Web browser should find the 
FVS318v3 VPN Firewall and display the home page as shown in 

.

3.

Click Setup Wizard on the upper left of the main menu.

4.

Click Next to proceed. Input your ISP settings, as needed.

5.

At the end of the Setup Wizard, click the Test button to verify your Internet connection. If you 
have trouble connecting to the Internet, use the Troubleshooting Tips 

 to correct basic problems, or refer to 

.”