Netgear D6200-100NAS 사용자 설명서



Select ADVANCED > Setup > LAN Setup.

Enter the settings that you want to customize.

These settings are described in the following section, 

Click Apply.

LAN Setup Screen Settings

You can configure the settings described in the following sections:

IP Address. The LAN IP address of the WiFi DSL modem router.

IP Subnet Mask. The LAN subnet mask of the WiFi DSL modem router. Combined with 
the IP address, the IP subnet mask allows a device to know which other addresses are 
local to it, and which have to be reached through a gateway or WiFi DSL modem router.

RIP Direction. Router Information Protocol (RIP) allows a router to exchange routing 
information with other routers. This setting controls how the router sends and receives 
RIP packets. Both is the default setting. With the Both or Out Only setting, the router 
broadcasts its routing table periodically. With the Both or In Only setting, the router 
incorporates the RIP information that it receives.

RIP Version. This setting controls the format and the broadcasting method of the RIP 
packets that the WiFi DSL modem router sends. It recognizes both formats when 
receiving. By default, the RIP function is disabled. 

RIP-1 is universally supported. It is adequate for most networks, unless you have an 
unusual network setup.