Netgear DG834GUV5 사용자 설명서

Configuring Your Wireless Network and Security Settings

2-7

To set up wireless security, you can either manually configure it in the Wireless Settings screen, or 
you can use Wi-Fi Protected Setup (WPS) to automatically set the SSID and implement WPA/
WPA2 security (see 

. 

Security Options (see 

• Disabled. You can use this setting to establish 

wireless connectivity before implementing wireless 
security. NETGEAR strongly recommends that you 
implement wireless security.

• WEP (Wired Equivalent Privacy). Use encryption 

keys and data encryption for data security. You can 
select 
64-bit or 128-bit encryption. See 

.

Key). Allow only computers configured with WPA to 
connect to the modem router. See 

Shared Keys). Allow only computers configured with 
WPA2 to connect to the modem router. See 

• WPA-PSK + WPA2-PSK. Allow computers configured 

with either WPA-PSK or WPA2-PSK security to 
connect to the modem router. See 

• The WPA-802.1x, WPA2-802.1, and WPA-802.1x 

+WPA2-802.1 options utilize user authentication 
implemented using IEE 802.1x and Radius servers. 
See 

. 

Note: If you use a wireless computer to configure wireless security settings, you will be 

disconnected when you click Apply. Reconfigure your wireless computer to match 
the new settings, or access the modem router from a wired computer to make 
further changes.