Netgear DGFV338 사용자 설명서

2-4

Basic Installation and Configuration

3. Click Login. The ProSafe Wireless ADSL Modem VPN Firewall Router user interface will 

display. 

Depending on how you connected your gateway to the Internet, you can configure your ISP 
settings by choosing the ADSL ISP settings (for DSL) or the Ethernet ISP settings (for 10/100). If 
you connected to both, you can configure both. 

To automatically configure your ADSL ISP settings and connect to the Internet:

1. Go to the ADSL ISP Settings screen shown in 

 by selecting the primary menu 

option Network Configuration and the sub-menu option WAN Settings.

2. Click Auto Detect at the bottom of the screen to automatically detect the type of Internet 

connection provided by your ISP. Auto Detect will probe for different connection methods and 
suggest one that your ISP will most likely support.

When Auto Detect successfully detects an active Internet service, it reports which connection type 
it discovered. The options are described in the 

To automatically configure your Ethernet ISP settings and connect to the Internet:

1. Select the Ethernet ISP Settings screen similar to the one shown in 

 should display. 

2. Click Auto Detect at the bottom of the screen to automatically detect the type of Internet 

connection provided by your ISP. Auto Detect will probe for different connection methods and 
suggest one that your ISP will most likely support.

Note: You might want to enable remote management at this time so that you can log 

in remotely in the future to manage the gateway. See 

 for more information. Remote management 

enable is cleared with a factory default reset.

Note: When you enable remote management, we strongly advise that you change 

your password. See 

 for the procedure on how to do this.

Note: To enable Auto-Rollover, you must have both ADSL and Ethernet ports connected 

and configured. If you intend to configure both, configure your primary WAN port 
first.