Fujitsu P2X0-0202-01EN 사용자 설명서
Chapter 2 Setup
27
P2X0-0202-01EN ETERNUSmgr User Guide -Introduction-
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
2
Caution:
• Bold text indicates the portions that have been changed.
• ETERNUSmgr is able to indicate the current status of each target device in the top
• ETERNUSmgr is able to indicate the current status of each target device in the top
menu. This is done using the following line after the link to the Alarm History Files
Directory. When the device IP address is changed, also change this line. If status dis-
play is not performed, delete this line.
Directory. When the device IP address is changed, also change this line. If status dis-
play is not performed, delete this line.
<!-- Status of 000.000.000.000 -- <font color="red">(*Offline*)</font>
"The "
<font color="red">(*Offline*)</font>
" portion of this line is overwritten
by either one of the following.
for Top Menu details.
2.5
Monitoring Multiple Target Devices
This chapter explains how to monitor multiple target devices by creating new setup files and editing the
top menu.
top menu.
2.5.1
Setup File Cautions
To monitor multiple target devices, a new setup file must be created for each target device that is to be
monitored:
The following naming format must be used for the setup files.
monitored:
The following naming format must be used for the setup files.
If the file name is other than as specified above, ETERNUSmgr will not be able to detect the file.
The only place setup files should be saved is the installation directory. If a setup file is saved in another
directory, ETERNUSmgr will not be able to find it.
The next time the ETERNUSmgr starts, monitoring of the new target devices will start. To begin monitor-
ing immediately, manually reboot ETERNUSmgr.
The only place setup files should be saved is the installation directory. If a setup file is saved in another
directory, ETERNUSmgr will not be able to find it.
The next time the ETERNUSmgr starts, monitoring of the new target devices will start. To begin monitor-
ing immediately, manually reboot ETERNUSmgr.
2.5.2
Creating a Setup File for Each Target Device
For each additional device that is to be monitored, save a renamed copy of the sample setup file (created by
the installation procedure in the Installation Directory) and edit the parameters as necessary for the given
target.
The following example procedures assume that the setup file for device 1 already exists and just creates a
new setup file for device 2.
the installation procedure in the Installation Directory) and edit the parameters as necessary for the given
target.
The following example procedures assume that the setup file for device 1 already exists and just creates a
new setup file for device 2.
Caution:
No special text editor is required to edit a setup file.
Normal
<font color="black">(Normal)</font>
Offline
<font color="red">(*Offline*)</font>
ATTENTION
<font color="red"><b>(*ATTENTION*)</b></font>
BUSY
<font color="red">(*BUSY*)</font>
Format: STX-.INI