Fujitsu P2X0-0202-01EN 사용자 설명서
31
P2X0-0202-01EN ETERNUSmgr User Guide -Introduction-
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
3
Chapter 3
Startup and Shutdown
This chapter explains how to startup and shutdown ETERNUSmgr.
3.1
ETERNUSmgr for Solaris OS and Linux
This section explains how to manually startup and shutdown ETERNUSmgr, for Solaris OS and Linux as
well as how to set ETERNUSmgr for automatic startup.
well as how to set ETERNUSmgr for automatic startup.
3.1.1
Starting Up ETERNUSmgr
Perform the following to start ETERNUSmgr for Solaris OS and Linux:
Procedure
1
Become the superuser.
# su
2
Execute the execution control script with the start option:
# /opt/FJSVgrmgr/stxpoll start
3
Confirm the daemon is running:
# ps -e | grep stxpolld
999 ? 0:00 stxpolld
After ETERNUSmgr has started up, you need to view the log file to confirm whether or not ETER-
NUSmgr is in communication with the target device. If using the E-mail notification function, also check
that E-mail notification of ETERNUSmgr startup and changes in the target device states is received.
ETERNUSmgr startup can be confirmed by:
NUSmgr is in communication with the target device. If using the E-mail notification function, also check
that E-mail notification of ETERNUSmgr startup and changes in the target device states is received.
ETERNUSmgr startup can be confirmed by:
• Use the ps command to check that the service is activated.
• Checking the log, and making sure that communication with the target device is normal.
• Checking E-mails, and making sure that communication with the target device is normal
• Checking the log, and making sure that communication with the target device is normal.
• Checking E-mails, and making sure that communication with the target device is normal
(if the E-mail notification function is used).
When monitoring multiple target devices, you must check each target device separately. For example, if
monitoring three devices, issue the ps command to check that all three devices are activated, and then
browse each of the three logs to make sure that communications with all are normal.
The following message appears when you try to startup ETERNUSmgr by the above procedure and ETER-
NUSmgr is running already. ETERNUSmgr must be shutdown before it can be started up. For instructions
on how to shut down ETERNUSmgr, refer to
monitoring three devices, issue the ps command to check that all three devices are activated, and then
browse each of the three logs to make sure that communications with all are normal.
The following message appears when you try to startup ETERNUSmgr by the above procedure and ETER-
NUSmgr is running already. ETERNUSmgr must be shutdown before it can be started up. For instructions
on how to shut down ETERNUSmgr, refer to
/opt/FJSVgrmgr/stxpoll: Already running.
*** stxpoll could not start. ***