Gateway 9315 사용자 설명서
63
www.gateway.com
5
Press the S
PACEBAR
to select the array. The Logical Drive Configuration screen opens.
6
Select the physical drives to associate with the current array, then press the S
PACEBAR
.
7
Set the RAID level for the logical drive by highlighting RAID and pressing E
NTER
. The
available RAID levels for the current logical drive are shown.
8
Select a RAID level, then press E
NTER
.
9
Set the RAID logical drive size and stripe size.
10
When you have defined the current logical drive, select
Accept
, then press E
NTER
.
11
Repeat
through
to configure additional logical drives.
12
Save the configuration when prompted, then press E
NTER
to return to the
Management
menu.
13
Select
Initialize
from the
Management
menu.
14
Use the S
PACEBAR
to highlight the logical drive to initialize, then press F10.
15
Select
Yes
at the prompt, then press E
NTER
to begin initialization. A graph will show
the progress of the initialization process.
16
When the initialization process is complete, press E
SC
to return to the previous menu.
17
Exit the RAID Configuration utility and reboot the server.
Caution
Initializing the RAID array destroys any data on the hard drives in the
selected array.
selected array.