Polycom DOC2238A 사용자 설명서
MGC+ Hardware and Installation Manual
2-15
Installing the I/O Card for the ReadiManager IAM
To install the I/O card for the ReadiManager IAM:
1.
Remove the right rear I/O cover by loosening the four screws as shown
in the following illustration.
in the following illustration.
Figure 2-5: MGC+ 50/100 rear panel detachment
2.
Remove the I/O card for the ReadiManager IAM from its package and
insert it in its slot as shown in the following illustration.
insert it in its slot as shown in the following illustration.
Figure 2-6: MGC+ ReadiConvene IAM rear I/O Insertion
3.
Push the I/O card firmly into the MGC+ backplane. Make sure its is
properly seated in its slot.
properly seated in its slot.
4.
Tighten the four screws that secure the I/O card to the MGC+ chassis.
5.
Attach the required cables or connections to the I/O card for the
ReadiManager IAM.
ReadiManager IAM.