Polycom DOC2238A 사용자 설명서
Chapter 4 - Hardware Description
4-14
Power Module in the MGC+50
In the MGC+50, the Power Supply Module is not hot swappable. The power
supply automatically senses the AC input voltage.
supply automatically senses the AC input voltage.
The capacities of the power supply module are shown in Table 4-3,
“MGC+50 Power supply module capacity”.
“MGC+50 Power supply module capacity”.
Power Supply Cord
The MGC+100 and the MGC+50 use only power supply cords supplied by
Polycom Inc.or equivalent UL approved cable, rated at a current of up to 15
A, depending on country standards, for its AC power supply. The following
specifications are for both the MGC+100 and MGC+50.
Polycom Inc.or equivalent UL approved cable, rated at a current of up to 15
A, depending on country standards, for its AC power supply. The following
specifications are for both the MGC+100 and MGC+50.
Circuit Breaker (AC Power)
Currently, MGC+100 and MGC+50 Control Units come equipped with a
circuit breaker
circuit breaker
.
Table 4-3: MGC+50 Power supply module capacity
Voltage (V)
Maximum current (Amp.)
5
120
12
13
-12
.5
Table 4-4: MGC+ Circuit Breaker Specifications
MGC+ 50
MGC+100
AC Voltage - 10Amp at 100
VAC, 5 Amp at 240 VAC
protected by a 15 Amp circuit
breaker.
VAC, 5 Amp at 240 VAC
protected by a 15 Amp circuit
breaker.
AC Voltage - 15 Amp at 100 VAC
and 7.5 Amp at 240 VAC
protected by a 15 Amp circuit
breaker.
and 7.5 Amp at 240 VAC
protected by a 15 Amp circuit
breaker.