Avaya CMC1 사용자 설명서

Upgrading R6csi/R7csi/R8csi to Avaya Communication Manager on an Avaya DEFINITY Server CSI

192 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways

Save Announcements (if necessary)

Note:

Note:

The TN750C and TN2501AP Integrated Announcement circuit packs store
announcements in nonvolatile memory; saving the announcements to a flashcard
is optional.

To save announcements:

1. If the PPN contains a TN750/B Announcement circuit pack, type display announcements

and press Enter.

2. If administered recorded announcements are listed, type save announcements UUCSS

and press Enter. For example, 01D03. This takes about 30 minutes.

Note:

Note:

For some DEFINITY ECS software versions, type save announcements from
UUCSS. Type help and press Enter for complete command syntax.

Shut Down DEFINITY AUDIX System (if necessary)

WARNING:

WARNING:

Neglecting to shut down the AUDIX assembly before powering down the system
cabinet where it resides can damage the AUDIX disk.

To shut down the DEFINITY AUDIX system:

1. Shut down the AUDIX assembly and allow the disk to completely spin down. Refer to

DEFINITY AUDIX Power Procedures

on page 203.

CAUTION:

CAUTION:

If leaving AUDIX System in the carrier, back it out about 2 in. (5 cm) to eliminate
the possibility of damage due to power surges.

Replace Circuit Packs

CAUTION:

CAUTION:

When working with any cabinet hardware, wear a grounded wrist strap to ground
yourself against electrostatic discharge (ESD).

To replace circuit packs:

1. Pull out the TN798 processor to power down the cabinet.