Avaya CMC1 사용자 설명서

The Speech Synthesizer circuit pack is required when the Voice Message Retrieval, Automatic 
Wakeup, or Do Not Disturb features are activated. The circuit pack does not require 
administration.

To add speech synthesis:

1. Determine the port assignment of the Speech Synthesizer circuit pack being added.

2. Install the Speech Synthesizer circuit pack in the designated carrier slot.

The tones for the Code Calling feature are generated by the Tone-Clock circuit packs in the port 
networks.

To add code calling access:

1. Install an Auxiliary Trunk circuit pack or a Speech Synthesizer circuit pack and connect for 

Loudspeaker Paging. The Code Calling Access feature shares the same ports as 
Loudspeaker Paging. An Auxiliary Trunk circuit pack provides 4 ports for Loudspeaker 
Paging and Code Calling Access.

2. Administer the form listed under “Code Calling Access” in Administrator’s Guide for Avaya 

Communication Manager.

Modem pooling supports two types of conversion resources: integrated and combined. 

An integrated conversion requires a Pooled Modem circuit pack for each 2 conversion 
resources provided.

A combined conversion requires a port of a TN745B or TN2136 Digital Line circuit pack and a 
port of either an 8-port TN742, TN769, a 16-port TN746B, or a 24-port TN793B/CP Analog Line 
circuit pack for each conversion resource provided. 

The pooled modem requires a WP90110 L7 power supply. Although integrated conversion can 
use either the L5 or L7, the combined only works with an L7.