Avaya CMC1 사용자 설명서
Install and Wire Telephone Power Supplies
Issue 10 June 2005
93
Dual Wiring of 2-Wire and 4-Wire Endpoints
Do not simultaneously wire a 2-wire and 4-wire endpoint to the same equipment location in an
MDF, even though they connect to different colored wire pairs. The system uses separate circuit
packs to interface 2- and 4-wire endpoints, and none are capable of interfacing both.
MDF, even though they connect to different colored wire pairs. The system uses separate circuit
packs to interface 2- and 4-wire endpoints, and none are capable of interfacing both.
Install 26B1 Selector Console — Optional
To install a 26B1 selector console:
1. Connect the supplied 3-foot (0.9 m) D8AC cable to the modular jack on the bottom of the
26B1 Selector Console.
2. Route the cable to the attendant console and connect to the DXS/BLF jack.
3. Attach labels according to the Attendant Console form.
4. Administer the console using Administrator’s Guide for Avaya Communication Manager.
Administer IP Stations and Trunks
For complete information on administering IP stations and trunks, see Administrator’s Guide for
Avaya Communication Manager.
Avaya Communication Manager.
Install and Wire Telephone Power Supplies
This section provides information and wiring examples of installation procedures for various
telephone and console power supplies. These are examples only and actual wiring procedures
may vary at each site.
telephone and console power supplies. These are examples only and actual wiring procedures
may vary at each site.
The power is provided to telephones or consoles either locally or centrally.
Centrally located power supplies include
●
●
●
Local power supplies include
●