Cabletron Systems NBR-420 사용자 설명서

Chapter 3: Installation

Install the NBR in a 19-inch rack as follows:

1. Remove four cover screws (two from each side) located along the 

front edges of each side of the NBR. See Figure 3-8.

2. Using the four 6-32 x 3/8-inch replacement flathead screws, attach the 

rack mounting brackets to each end of the NBR.

3. With the mounting brackets attached, position the NBR between the 

vertical frame members of the 19-inch rack and fasten it securely with 
the mounting screws. See Figure 3-9.

Screws (4)

Rack Mounting

Brackets (2)

 

MULTI PORT BRIDGE ROUTER

 

WITH

 

LANVIEW

®

1092_02

Screws (4)

19-Inch Rack

 

MULTI PORT BRIDGE ROUTER

 

WITH

 

LANVIEW

®

1092_13