Cabletron Systems NBR-420 사용자 설명서
Installing the NBR
NBR-SERIES Installation Guide
Page 3-13
•
If a shelving unit is to be used, it must be able to support 30 pounds
(13.6 kg) of static weight.
(13.6 kg) of static weight.
•
The temperature for the selected location must be maintained between
5
5
°
and 40
°
C, and less than 10
°
C per hour temperature change.
3.3.1 Attaching the Strain-Relief Bracket
Attach the strain-relief bracket to the front of the NBR as follows:
1. Remove the strain-relief bracket and four 8-32 x 3/8-inch screws from
the NBR installation kit.
2. Attach the strain-relief bracket to the bottom of the NBR as shown in
Figure 3-7.
Figure 3-7
Attaching the Strain-Relief Bracket
Use only the appropriate screws to attach the strain relief. Use
of longer screws may cause damage to the unit or electrical
shock.
of longer screws may cause damage to the unit or electrical
shock.
NBR-620
MULTI PORT BRIDGE ROUTER
WITH
LANVIEW
®
PORT D
PORT C
PORT B
PORT A
PORT F
PORT E
Strain-Relief
Screws (4)
Strain-Relief
Bracket
1092_12