ZyXEL Communications Wireless Gateway Series 사용자 설명서
ZyAIR Wireless Gateway Series User’s Guide
19-4
LAN Setup
Table 19-2 Menu3.2 TCP/IP Ethernet Setup
FIELD DESCRIPTION
EXAMPLE
Version Press [
SPACE BAR]
to select the RIP version. Choices are RIP-1,
RIP-2B or RIP-2M.
RIP-1
Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol
used to establish membership in a Multicast group. The ZyAIR supports
both IGMP version 1(IGMP-v1) and version 2 (IGMP-v2). Press the
[
both IGMP version 1(IGMP-v1) and version 2 (IGMP-v2). Press the
[
SPACE BAR]
to enable IP Multicasting or select None to disable it.
None
Edit IP Alias The ZyAIR supports three logical LAN interfaces via its single physical
Ethernet interface with the ZyAIR itself as the gateway for each LAN
network.
Press [
network.
Press [
SPACE BAR
] to select Yes and press [
ENTER
] to go to menu
3.2.1.
No
When you have completed this menu, press [
ENTER
] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [
ESC
] at any time to cancel.
19.3 IP Alias
IP Alias allows you to partition a physical network into different logical networks over the same Ethernet
interface. The ZyAIR supports three logical LAN interfaces via its single physical Ethernet interface with
the ZyAIR itself as the gateway for each LAN network.
interface. The ZyAIR supports three logical LAN interfaces via its single physical Ethernet interface with
the ZyAIR itself as the gateway for each LAN network.
Figure 19-4 Physical Network Figure 19-5 Partitioned Logical Networks
Use menu 3.2.1 to configure IP Alias on your ZyAIR.