ZyXEL Communications Wireless Gateway Series 사용자 설명서

ZyAIR Wireless Gateway Series User’s Guide 

19-6 

LAN Setup 

IP Alias 

Choose Yes to configure the LAN network for the ZyAIR. 

IP Address 

Enter the IP address of your ZyAIR in dotted decimal notation 

192.168.1.1 

IP Subnet Mask  Your ZyAIR will automatically calculate the subnet mask based on the 

IP address that you assign. Unless you are implementing subnetting, 
use the subnet mask computed by the ZyAIR 

255.255.255.0 

RIP Direction 

Press [

SPACE BAR

] to select the RIP direction. Choices are None, 

Both, In Only or Out Only. 

Version 

Press [

SPACE BAR]

 to select the RIP version. Choices are RIP-1, 

RIP-2B or RIP-2M. 

Incoming 
Protocol Filters 

Enter the filter set(s) you wish to apply to the incoming traffic between 
this node and the ZyAIR. 

 

Outgoing 
Protocol Filters 

Enter the filter set(s) you wish to apply to the outgoing traffic between 
this node and the ZyAIR. 

 

When you have completed this menu, press [

ENTER

] at the prompt “Press ENTER to Confirm…” to save 

your configuration, or press [

ESC

] at any time to cancel. 

Use menu 3.5 to set up your ZyAIR as the wireless access point. To edit menu 3.5, enter 3 from the main 
menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then press [ENTER] to display 
Menu 3.5 – Wireless LAN Setup as shown next.