ZyXEL Communications VMG1312-B 사용자 설명서
Chapter 9 Routing
VMG1312-B Series User’s Guide
160
9.2 The Routing Screen
Use this screen to view and configure the static route rules on the Device. Click Network Setting
> Routing > Static Route to open the following screen.
> Routing > Static Route to open the following screen.
Figure 60
Network Setting > Routing > Static Route
The following table describes the labels in this screen.
Table 37
Network Setting > Routing > Static Route
LABEL
DESCRIPTION
Add new static
route
route
Click this to configure a new static route.
#
This is the index number of the entry.
Status
This field displays whether the static route is active or not. A yellow bulb signifies that this
route is active. A gray bulb signifies that this route is not active.
route is active. A gray bulb signifies that this route is not active.
Name
This is the name that describes or identifies this route.
Destination IP
This parameter specifies the IP network address of the final destination. Routing is always
based on network number.
based on network number.
Subnet Mask
This parameter specifies the IP network subnet mask of the final destination.
Gateway
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward packets to
their destinations.
network segment as the device's LAN or WAN port. The gateway helps forward packets to
their destinations.
Interface
This is the WAN interface used for this static route.
Modify
Click the Edit icon to edit the static route on the Device.
Click the Delete icon to remove a static route from the Device. A window displays asking
you to confirm that you want to delete the route.
you to confirm that you want to delete the route.