ZyXEL Communications VMG1312-B Manual Do Utilizador

Chapter 9 Routing

VMG1312-B Series User’s Guide

Use this screen to view and configure the static route rules on the Device. Click Network Setting 
> Routing > Static Route to open the following screen.

Network Setting > Routing > Static Route

The following table describes the labels in this screen. 

Network Setting > Routing > Static Route

Add new static 
route

Click this to configure a new static route.

#

This is the index number of the entry.

Status

This field displays whether the static route is active or not. A yellow bulb signifies that this 
route is active. A gray bulb signifies that this route is not active.

Name

This is the name that describes or identifies this route. 

Destination IP

This parameter specifies the IP network address of the final destination. Routing is always 
based on network number. 

Subnet Mask

This parameter specifies the IP network subnet mask of the final destination.

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the same 
network segment as the device's LAN or WAN port. The gateway helps forward packets to 
their destinations.

Interface

This is the WAN interface used for this static route.

Modify

Click the Edit icon to edit the static route on the Device.

Click the Delete icon to remove a static route from the Device. A window displays asking 
you to confirm that you want to delete the route.