Technicolor - Thomson 210i 사용자 설명서

 

Names and descriptions of your router’s front panel LEDs are given below: 

 

  

♦ 

POWER— Comes on as soon as you connect the router to the power 
adapter and plug the power adapter into a suitable AC outlet. 

♦ 

STATUS— Should be blinking if the router is functioning properly. 

♦ 

ISDN – LINK— Indicates that the router has an ISDN line connected to 
the ISDN interface and it has been successfully initialized. 

Note:   On some NT1 boxes, the LINK indicator will go off when the ISDN line has been 

idle for a while. When the router is dialing or answering a call, it should be on again.  

♦ 

ISDN – B1 and B2— On if there is an active ISDN session on that channel 
or if that channel is making or receiving a call.  

♦ 

LINK/ACT— 1 through 4 These indicators light up when a port is 
connected to a powered-on Ethernet/Fast Ethernet station. The LEDs blink 
when information is transmitted or received on a port. 

♦ 

100/10M – 1 through 4 These indicators light up when a port is operating at 
100Mbps. Otherwise, if this indicator is dark and the corresponding LINK 
indicator is lit, then the port is operating at 10Mbps.