Alcatel Carrier Internetworking Solutions Switch/Router 사용자 설명서

Page 6-9

The 

 command has two functions: displaying the 

MPX

 redundancy configuration and 

entering the 

 menu. Displaying the 

MPX

 redundancy is described below and the mpm 

menu is described in MPM Menu Commands on page 6-9.

You can display the number of 

MPXs

, their location in the switch, and the 

MPX

 redundancy 

configuration of the switch by entering

at the system prompt. The following is a typical example of the message that displays when 
you enter 

 for a switch without a redundant 

MPX

.

The following is a typical example of the message that displays when you enter 

 for a 

switch with redundant 

MPXs

 on the primary 

MPX

.

The following is a typical example of the message that displays when you enter 

 for a 

switch with redundant 

MPXs

 on the secondary 

MPX

.

The 

 command also takes you to the 

 menu which contains the commands needed 

to configure single and redundant 

MPXs

. With a serial or modem connection, you can 

communicate with either the primary or secondary 

MPX

 by connecting to the respective RS232 

connectors. With a telnet connection, however, you can only communicate with the primary 

MPX

.

Type a 

 to list the 

 commands. One set of commands will be displayed if you are 

connected to the primary 

MPX

 and another command will be displayed if you are connected 

to the secondary 

MPX

. If you are connected to the primary 

MPX

, you will see the following.