ASUS PCEN10 사용자 설명서

ASUS WLAN Card

Network Type
 

Infrastructure - Select the Infrastructure 

mode to establish a connection with an 

AP.

 

Ad Hoc - Select the Ad Hoc mode to 

communicate with a station. An Ad Hoc 

network is formed quickly and easily 

without pre-planning. For example, you can share meeting notes among 

networked computers in a meeting room.

Action mode name & Network Name (SSID) - Key in or select from the dropdown 

list the SSID of an AP or station you are trying to connect to. An SSID must be valid 

characters and have a maximum of 32 case sensitive characters, such as Wireless 

LAN.

NOTE: Set the SSID to a null string if you want to allow your WLAN card to  

connect to any AP it can find. You cannot use a null string in the Ad Hoc mode.

Channel - Select a radio channel for your WLAN card. In the Infrastructure 

mode, your WLAN card automatically selects the correct channel required to 

communicate with an AP and this field shows 

Auto. In the Ad Hoc mode, you are 

allowed to select a channel for your WLAN Card. WLAN cards in the same network 

can communicate with each other if they have the same channel setting.
The radio channels you can use depend on the regulations in your country. In the 

United States (FCC) and Canada (IC), channels 1 to 11 are supported. In Europe 

(ETSI), channels 1 to 13 are supported. In Japan (MKK), channels 1 to 14 are 

supported.
Data Rate - Auto: The WLAN card adjusts to the most suitable transmission rate  

 

automatically.

 

Encryption - Launches the Encryption page.

 

Advanced - Launches the Advanced page. In most cases, you do not need to  

        change the default values.

 

Troubleshooting - Displays the troubleshooting solutions.