ASUS PCEN10 사용자 설명서

다운로드
페이지 34
PCE-N10 WLAN Card User Manual
17
ASUS WLAN Card
Config - Encryption
The Encryption page allows you to set 
up the encryption settings for your WLAN 
card. For data confidentiality in a wireless 
environment, IEEE 802.11 specifies a Wired 
Equivalent Privacy (WEP) algorithm to 
offer transmission privacy similar to wired 
network. WEP uses keys to encrypt data 
packets sent and decrypt data packets 
received. The encryption process can 
scramble frame bits to avoid disclosure to others. Wi-Fi Protected Access (WPA) is 
an improved security system for 802.11 that encrypts data sent over radio waves. 
WPA is developed to overcome the weakness of the WEP protocol.
Network Authentication - Set up authentication for your WLAN card. Options are:
 
Open - Sets the network operating in the Open System mode that disables 
authentication protection for the network or use the WEP encryption for the 
network. 
 
Shared - Sets the network operating in the Shared Key mode that uses the 
WEP encryption for your network.
 
WPA-PSK/WPA2-PSK - Use the WPA Pre-Shared Key/WPA2 Pre-Shared Key 
in the Infrastructure mode for authentication.
 
WPA/WPA2 - Enables the IEEE 802.1x authentication mode. This mode is for 
environments with Remote Access Dial-in User Service (Radius). In a RADIUS 
environment, various Extensible Authentication Protocol (EAP) are supported, 
including PEAP, TLS/Smart Card, TTLS, and LEAP.
Data Encryption - In the Open and Shared authentication modes, options are: 
Disabled and WEP.
 
Disabled - Disables the encryption protection for your WLAN card.
 
WEP - Encrypts the data before it is transmitted over the air. You can 
communicate with wireless devices that use the same WEP keys.
In the WPA-PSK and WPA2-PSK authentication modes, options are: Temporal Key 
Integrity Protocol (TKIP) and Advanced Encryption Standard (AES).
 
TKIP - Dynamically generates unique keys to encrypt data packet.  
 
AES - Offers stronger protection and increases the complexity of wireless 
encryption. It is a symmetric 128-bit block encryption method that works 
simultaneously on multiple network layers.