Sanyo PLC-WXE45 사용자 가이드

The WARNING indicator shows the state of the function which protects the projector. Check the state of the

WARNING indicator and the POWER indicator to take proper maintenance.

When the temperature inside the projector reaches a

certain level, the projector is automatically shut down to

avoid overheating. The POWER indicator is blinking while

the projector is being cooled down. When the projector has

cooled down enough (to its normal operating temperature),

it can be turned on again by pressing the POWER ON/

STAND-BY button.

Note:
 The WARNING indicator continues to blink even after the 
temperature inside the projector returns to normal. When 
the projector is turned on again, the WARNING indicator 
stops blinking. 

–   Did you provide appropriate space for the projector to

be ventilated? Check the installing condition to see if

ventilation slots are not blocked.

–   Has the projector been installed near an Air-Conditioning/

Heating Duct or Vent? Move the installation of the

projector away from the duct or vent.

–   Are the air filters clean? Clean the air filters periodically.

(p.55)

When the projector detects an abnormal condition, it is

automatically shut down to protect the inside of the projector

and the WARNING indicator lights red. In this case,

unplug the AC power cord and plug it, and then turn on

the projector once again to verify operation. If the projector

cannot be turned on and the WARNING indicator lights red,

unplug the AC power cord and contact the service station.

DO NOT LEAVE THE PROJECTOR WITH THE

AC POWER CORD CONNECTED UNDER AN

ABNORMAL CONDITION. IT MAY RESULT IN FIRE

OR ELECTRIC SHOCK.

WARNING

blinking red

WARNING

emit a red light