Sanyo PLC-WXE45 사용자 가이드

Turn off the projector, and unplug the AC power cord

from the AC outlet.
Turn over the projector and remove the air filters by

pulling the latches upward.

Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the

air filters become clogged with dust particles, they will reduce cooling fans’ effectiveness and may result in a

buildup of internal heat and adversely affect the life of the projector. Clean the air filters by following the steps

below.

Clean the air filters with a brush or rinse them softly.

When rinsing the air filters, dry them well.

Replace the air filters properly. Make sure that the air

filters are fully inserted.

Do not operate the projector with the air filters

removed. Dust may accumulate on the optical

elements degrading picture quality. Do not put

anything into the air intake vents. Otherwise it may

result in malfunction of the projector.

When you use the projector under dusty or smoky

conditions, dust may accumulate on the lens, LCD panels,

or optical elements inside the projector degrading the

quality of a projected image.

When the symptoms above are noticed, contact your

authorized dealer or service station for proper cleaning.

Note:
When reinserting the air filters, be sure that 
the slit part is facing the outer side.

Be sure to reset the Filter counter after cleaning or replacing the filters.

Press  the  MENU  button  to  display  the  On-Screen

Menu.  Use  the  Point

◄►

 buttons  to  move  the  red

frame pointer to the Setting Menu icon.
Use  the  Point

▲▼

 buttons  to  move  the  red  frame

pointer  to  Filter  counter  and  then  press  the  SELECT

button.  A  dialog  box  appears  showing  the  total

accumulated  time  of  the  filter  use,  a  timer  setting

option,  and  the  reset  option.  Select  Reset  and  the

“Filter  counter  Reset?”  appears.  Select  [Yes]  to

continue.

Another  confirmation  dialog  box  appears,  select  [Yes]

to reset the Filter counter.

Air filters

Pull up and remove.

Select Reset and

the “Filter counter

Reset?” appears.

Select [Yes],

then another

confirmation

box appears.

Select [Yes] again

to reset the Filter

counter.