Epson 7800p 사용자 설명서

EPSON PowerLite 7800p Projector

5/03

When you finish changing an address in the network menu,
press the

Enter

button (on the remote control) or the

Auto/Enter

button (on the projector). This stores the

value.

6. When you’re done making all necessary changes, press

ESC

to exit the menu system.

Opening and Closing EMP Monitor

To start EMP Monitor, click

Start > Programs

All

Programs > EPSON Projector > EMP Monitor

If you’ve added the program to the Startup programs folder, it
may already be open. If so, click the icon in the system tray on
the lower-right corner of your screen to display the EMP
Monitor window:

To close EMP Monitor, right-click the program icon shown
above, then select

Exit

Registering Projectors in EMP Monitor

Before you can monitor a projector, you have to register it.
Follow these steps:

1. Open EMP Monitor. You see this screen:

2. Click

. You see this screen:

3. Click

Auto detect

to locate projectors currently operating

on the network. Or click

Manual registration

and enter

the projector’s name and network address.

Note: If Auto detect fails to find the projector, your projector
may not be connected or configured correctly for the network.

Any projectors found on the network are listed:

4. Select each projector you want to add by clicking its name

and clicking

Add

. When you’re done, click

You see this screen listing all registered projectors:

Note: To delete a projector from the list, highlight the
projector name, and click

Delete

5. Click

. You see the status of each of your registered

projectors on the main EMP Monitor screen:

Click here to start EMP Monitor

Click here