Epson EMP-100NL 사용자 설명서

78 - Troubleshooting

When you think you have a problem, first of all check the Indicators on the projector.
The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to 
advise the user of the projector’s status.

Indicator Status

Cause

Recovery or Status

Reference 

Page

Illuminated in 
Orange

Stand-by status

(Not an error)
Projection will be started when the [Power] 
button is pressed.

39

Blinking in 
Orange

Cool-down proce-
dure in progress

(Not an error)
· Wait for a moment. The acount of time for the 

projector to cool down (cooling the lamp) will 
depend on the external temperature, etc.

· The [Power] button cannot be used during 

the cool-down period. This will be 
illuminated in orange once the cool-down 
process has been completed, so press the 
button once more then.

46

Illuminated in 
Green

Projection in 
progress

(Not an error)

40

Blinking in 
Green

Warm-up in 
progress

(Not an error)
· Wait for a moment.
· The amount of time required for the warm-up 

procedure is approximately 30 seconds.

· The green lamp will stop blinking and 

become illuminated once the warm-up 
procedure has been completed.

40

Illuminated in 
Red

Internal error

Cease operations, remove the Power Plug from 
the socket and contact your dealer or nearest 
adress provided at page 104 and request 
repairs.

Operation Indicator

Lamp Indicator

Temperature Indicator